JPC Solar 130/12V Polycrystalline Solar Module



Module characteristics

 

• 36 polycrystalline silicon solar cells (156mm x 156mm) which are connected in series and capable of charging 12V batteries

• Heavy duty anodised aluminium frame provides high wind resistance and convenient mounting access

• Cells are laminated between high transmissivity, low iron, 3mm tempered glass and a sheet of TPT material and finally two sheets of EVA to prevent moisture entering the module

• Installation holes for standard bracket systems are provided

• Diodes are installed to prevent “hot spot” effect

• Waterproof versatile junction box provides flexibility of connections

• Modules are manufactured in accordance with IEC 61215, and come with 25 years limited output guarantee

 

Electrical characteristics


Typical maximum power (Wp)                          130


Open circuit voltage (Voc)                              21.6


Optimum operating voltage (Vmp)                    17.49


Optimum operating current (Imp)                     7.46


Short circuit current (Isc)                              8.29


 

Standard parameters

 

Information below represents the output of typical modules in 12V configuration. *This data is based on measurements made in accordance with Standard Test Conditions (STC) 1000W/m2, AM 1.5, cell temperature 25ºC

 


Normal temperature                                     46±2ºC


Current temperature coefficient (Isc)             +0.10%/ºC


Voltage temperature coefficient (Voc)            -0.38%/ºC


Power temperature coefficient (Wp)              +0.47%/ºC


Edge grounding                                          ≤1ohm


Wind resistance                                         2400Pa


Maximum system voltage                             1000V


 

 

Mechanical characteristics


Weight                                                     12.6 kg


Size of module (mm)                                   1492 x 680 x 50